PA12 3035U TPV 美國埃克森美孚 8281-45MEDPC/ABS GP-5008A LCP德國赫斯特L130PP 18LPX-2PA66 CM3016G-25A PBT美國杜邦T805 BK851PC 1060DVDPA66/PTFE RBL-4036PA12 瑞士EMS TR90LSPP BJ380MOPC/ABS PC -540MBS M701PPO GN1106FJPC LS-3302A LCP日本新石油化學RC210 NC PP臺灣南亞3210M3 PA66德國巴斯夫A3GE6PA66尼龍66鹽的制備由二元酸和二元胺制取尼龍時，需要嚴格控制原料配比為等摩爾比，才能得到分子量較高的聚合物，因此，在生產中必須先把己二酸和己二胺混合制成尼龍66鹽。尼龍66鹽的制備是分別把己二胺的溶液與己二酸的溶液在60℃以上的溫度下攪拌混合，中和成鹽后析出，經過濾、醇洗、干燥，zui后配制成63%左右的水溶液，供縮聚使用。
When PA66 nylon 66 salt is prepared from diacid and two meta amine, it is necessary to strictly control the molar ratio as the molar ratio, so as to get a polymer with high molecular weight. Therefore, the mixture of adipic acid and adipamine must be mixed into nylon 66 salt in production. The preparation of nylon 66 salt is to mix adipic diamine solution and adipic acid solution at the temperature above 60 centigrade, neutralize it and precipitate after salt formation. After filtration, alcohol washing and drying, after Zui, about 63% of the water solution is prepared for condensation.

PC‖以滿足電子電器殼件對材料韌性、強度、耐熱等方面的高性能要求。這些材料在電子電器殼件上的應用，具有以下其它類材料不可替代的優點：?聚碳酸酯可
PC to meet the high performance requirements of electronic and electrical shell parts for toughness, strength and heat resistance. The application of these materials in electronic and electrical shell parts has irreplaceable advantages as follows: polycarbonate can be used.
??1）優越的抗沖擊性，沖擊強度在熱塑性塑料中名列前茅；
1) excellent impact resistance and impact strength are among the best in thermoplastics.
??2）良好的涂飾性和對覆蓋膜的黏附性；
2) good finishing and adhesion to the covering film.
??3）高度的尺寸穩定性；
3) high dimensional stability;
??4）將部件安裝整合成一體；
4) integrate the installation of components into one.
??5）設計和加工極具靈活性應用；
5) design and processing highly flexible applications;
??6）線膨脹系數低，熱膨脹系數小。
6) the coefficient of linear expansion is low and the coefficient of thermal expansion is small.

POM☆市場增長較快，而中國POM☆生產的基礎比較薄弱；另外POM☆是資金和技術密集型的材料類化工產品，中國巨大的市場引起了國外大的關注，其它國一直想以其產品占據中國市場，不愿轉讓技術，使中國POM☆的技術水平提高緩慢，不能滿足用戶需求；再有就是長期以來，中國經濟體制和 企業經營機制不符合市場經濟規律，企業不能及時獲得足夠的資金投入，制約了POM☆生產的發展。
POM, the market is growing fast, and the basis of China's POM production is relatively weak; in addition, POM is a material and technology intensive material chemical product. The huge market in China has aroused great concern abroad. Other countries have always wanted to occupy the Chinese market with their products, unwilling to transfer technology and improve the technical level of China's POM. Slow, can not meet the needs of the user; again, for a long time, China's economic system and enterprise operating mechanism do not conform to the law of the market economy, enterprises can not get enough capital investment in time, restricting the development of POM production.

PBT是同用工程塑料中工業化zui晚而發展zui快的一個品種，它之所以成為工程塑料的后起之秀，首先在于它具有優良的綜合性能，以及良好的成型加工性和性能/價格相比，故此PBT塑料雖然到70年代才工業化生產，但很快市場，現為五大工程塑料發展zui快的一種。
PBT is a kind of fast developing Zui in the same engineering plastics in the late industrialization of Zui. It has become a rising star of engineering plastics. First of all, it has excellent comprehensive performance and good processing property and performance / price. Therefore, the PBT plastic is not industrialized until 70s, but it is fast selling market. Now, it is a fast developing Zui for the five major engineering plastics.

PC DF0081PIPC HP1NREUPP 63A6-4 PP韓國韓華道達爾BJ750PP 1127N PA66 V1000 ABS基礎創新塑料AS002（AS-1002）PC HCG2530PA66 RD000PEI EF1008LCP HM302PEI EX07305 PP寧波臺塑1040FPBT 7390W PP沙特拉比格石化AR564 GPPS臺灣臺達866NPBT LW9030FR PBT基礎創新塑料DR51-7000 TPE韓國SKG130D PP韓國LG GP-3100 PA66意大利波利.布蘭德A 5GF NA VOA TR1 KW PA612日本宇部7115UCOC 5013IXEF 1022-9008PA6 SX216V60
⒉生產PBT所消耗的能量是工程塑料中zui低的的，這對于范圍內能源緊缺的情況下，具有十分重要的意義。
The energy consumption of producing PBT is lower than that of Zui in engineering plastics, which is of great significance for the shortage of energy in the world.
⒊耐熱老化性?xún)?yōu)異，增強后的UL溫度指數達到120~140℃，此外，戶外長期老化性也很好。
It has excellent heat aging resistance, enhanced UL temperature index of 120~140 C, and outdoor long term aging.
⒋耐溶劑好，無應力開裂。
It has good solvent resistance and no stress cracking.

ABS的成型溫度除耐熱級、電鍍級等品級的樹脂要求溫度稍高些（在210—2501)以改箸其熔體充模困難或有利于電鍍性能之外，對于通用級、阻燃級、抗沖級等ABS樹脂都希溫度取低些，以防發生分解或?qū)ζ湮锢頇C(jī)械性能不利。
The molding temperature of ABS is slightly higher than that of the heat and electroplating grade resins (210 to 2501) to modify the mold filling difficulty?or?to the electroplating performance. The temperature of the general, flame retardant and anti grade ABS resins is lower, in order to prevent disintegration?or?physical mechanical properties.

EVA由于在分子鏈中引入醋酸乙烯單體，從而降低了高結晶度，提高了韌性、抗沖擊性、填料相溶性和熱密封性能，被廣泛用于發泡鞋材、功能性棚膜、包裝模、熱熔膠、電線電纜及玩具等領域。特性是是廣泛用于發泡鞋材、功能性棚膜、包裝模、熱熔膠、電線電纜及玩具等領域。
Due to the introduction of vinyl acetate monomer in the molecular chain, EVA reduces the high crystallinity and improves the toughness, impact resistance, filler phase solubility and thermal sealing performance. It is widely used in the fields of foamed shoe material, functional shed film, packaging mold, hot melt adhesive, wire and cable and toy. It is widely used in foamed shoes, functional greenhouse films, packaging moulds, hot-melt adhesives, wires and cables, toys and so on.

TPE不良現象可能原因處理方法成品出模變型冷卻時間太短，成品未能足夠冷卻延長冷卻時間開模速度過快，強拉變型減緩開模速度成品構造有缺陷修改模具模溫過高，成品冷卻不到位降低模溫成品出模易破裂料溫過低或模溫過低提高炮筒溫度和模具溫度脫模斜度不夠或頂出頂出方式不當修改模具澆口太小修改模具脫模角不足修改模具
TPE bad phenomenon possible reason treatment method the finished mold variant cooling time is too short, the finished product can not cool enough to extend the cooling time to open the mold speed too fast, the strong tension change type slows the die speed to modify the mold mold temperature too high, the finished product cooling is not in place to reduce the temperature over the mold temperature and the die temperature too low. Low raise barrel temperature and mold temperature release angle is not enough?or?the top ejection way is improper, modify the mold gate too small, modify the mold release angle, modify the mold.

PA66 etc fastness.Skid resisting and save labour, east to process and color, have widely designspace.涂油系列（Eeay-paintingseries）GP410 GP420GP430應用范圍：各類涂油玩具、日常用品等，廣泛取代PVC。
PA66 etc fastness.Skid resisting and save labour, east to process and color, all kinds of oil and oil toys, daily necessities, and so on, widely replaced

?